7-Inch Skull LED Headlight for Jeeps, Vintage Cars & Motorcycles | Welvere

This 7-inch Skull LED headlight is designed for vehicles with a standard 7-inch headlight or a designated 7-inch mounting area. It is suitable for Jeeps, vintage cars and motorcycles.

The headlight has high- and low-beam modes, Cree chips, integrated anti-flicker technology and a black housing. Its three-pin connector combines the high- and low-beam connections.

Beam output and features

High-beam luminous flux is 6000 LM.

Integrated anti-flicker technology is included, and additional decoders are not required. Installation is described as a connect-and-go process, typically taking 20 minutes or less.

Installation and wiring

The three-pin connector combines the low- and high-beam connections. The wire colours correspond to these functions: blue for white light, yellow for yellow light and green for the Skull flash.

1. Connect the headlight using its three-pin connector.
2. Use the blue wire for white light, the yellow wire for yellow light and the green wire for the Skull flash.

Specifications

• Size: 7 inch
• Compatibility: vehicles with a standard 7-inch headlight or designated 7-inch mounting area; suitable for Jeeps, vintage cars and motorcycles
• LED chips: Cree
• Operating voltage: 12–24V
• Current draw: 2.47A@ 12.08V (low beam); 3.3A @ 12.08V (high beam)
• Power consumption: 30W (low beam); 40W (high beam)
• Raw luminous flux: High: 6000LM
• Housing colour: black
• Product weight: 0.6kg / 1.32lb
• Temperature range: -20 to 120 degrees F

Box contents

• 1 × Skull LED headlight

Additional specifications

• Ingress-protection rating: IP68.
• Rated LED lifespan: over 80,000 hours.