Pair of Flexible LED Daytime Running Light and Turn Signal Strips, 12V/24V | Welvere

This flexible LED strip is designed for vehicle exterior lighting, including daytime running lights and turn signals. At 4mm thick, it fits in the gap between the headlights and engine bonnet using adhesive tape, without drilling, screwing or removing the headlights.

The selected main light colour changes to flowing yellow when the turn signal is switched on. The strip is intended for 12V/24V vehicles, including cars, SUVs, vans, trucks, RVs, motorcycles, scooters and trailers.

Features and uses

The flexible strip can be used as daytime running lights, turn signal lights, angel eye lights, eyebrow lights or rear window lights.

• The soft rubber tube has silicone construction, a sealed, waterproof design, and is described as energy-saving and corrosion-resistant.
• SMD-3014 LEDs provide the light source. Separate IC controllers are used for the daytime running light and turn signal.
• The strip has a faster on/off response time and is vibration-resistant.

Specifications

• Material: soft rubber tube with silicone construction
• LED type: SMD-3014
• Input voltage: 12V/24V
• Power rating: 5.5W
• Thickness: 4mm
• Selectable lengths: 45 cm (17.72 in) and 60 cm (23.62 in)
• Working temperature: -40-60 ℃
• Stated lifespan: 50,000 hours

Installation and customising

Fit the strip with adhesive tape in the gap between the headlights and engine bonnet. The stated installation method requires no drilling, screwing or headlight disassembly. Connect the wires to the vehicle’s positive and negative sides.

1. Test the lights before starting work, and switch off the power during customising and installation.
2. Connect the red wire to power positive (+).
3. Connect the black wire to power negative (-) or ground.
4. Connect the yellow wire to the positive (+) wire for the left or right turn signal.
5. If shortening the strip, cut along the marked line. Keep debris out of the tube and seal the cut end with insulated glue.
6. Avoid straining or bending the cables excessively when opening the headlight for installation.

Box contents

• 2 x LED strips
• Connection wiring
• 1 x instruction manual